Corrugated Pipe Machine
Wood Plastic WPC Machiner
PP Hollow Corrugated Sheet Machine
Plastic Sheet Machine
Plastic Pipe Machine


Cleaning and Maintenance of New Plastic Wood Decking Floor

Cleaning and Maintenance of New Plastic Wood Decking Floor wood-plastic composite decking is a kind of bamboo/ wood mix  with polymer material (HDPE plastic) and processing aids as material. mixed uniformly and then heated and extruded by mold equipment. This kind of high-tech green environmentally friendly materials have both the properties and characteristics of wood and plastics, and can replace wood and plastics. The English abbreviation of Wood Plastic Composites is WPC. Plastic wood material is a new type of environmentally friendly and energy-saving composite material, can replace wood. It can be used for garden landscape, interior and exterior wall decoration, flooring, barriers, flower ponds, pavilions, etc. Generally speaking, the cleaning and maintenance of indoor plastic wood floors have the following points of attention: 1. Use soap, hot water and a hard brush to remove dirt and residue. After the plastic wood floor is installed, clean up dirt and debris in this way.2. Use alcohol or acetone to gently wipe the mark printed on the side of the plastic wood floor3. Use conventional floor cleaners or cleaners containing bleach (sodium hypochlorite) and detergent.4. If the floor has grease stains, immediately use a household degreaser to remove it, and then rinse with hot water.5. Wash the area with chalk marks with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor.6. ​​Melt ice and calcium chloride or rock salt on the floor. Most household product maintenance stores have it. When the ice starts to melt, rinse it off.7. Use hot soapy water to remove ink stains, and then wash thoroughly.8. Use cleaning products containing oxalic acid or phosphoric acid to remove dirt and rust stains on the floor. This will lighten the stain and it is possible to remove it.9. Use a common rust cleaner to remove the pigmentation pollution caused by the weathering of the floor.10. According to the instructions on the bleach package, mix the bleach into hot water to clean wine stains and fruit stains. Wipe the stains gently and rinse with hot water

What is Co Extrusion PE WPC ? What Advantage of Co Extrusion ?

What is Co Extrusion PE WPC ? What Advantage of Co Extrusion ? Co-extrusion wpc is a new product in recent years. It is produced by the most advanced extrusion molding technology in the industry.Co-extruded wood plastic has one more protective layer than ordinary wood plastic, which is more wear-resistant, scratch-resistant, stain-resistant, non-cracking, and non-mildew. Features: 1. co-extruded wood-plastic profile protective layer has the characteristics of high imitation wood pattern. 2. with a rich and diverse appearance, the board is more durable, non-cracking, stain-resistant, weather-resistant, and pressure-resistant, and its performance is greatly improved compared with ordinary wood plastic;3. The protective layer and the core layer are thermally mixed and extruded, and the coating is tight and not separated; the co-extrusion process has no stickies, formaldehyde and other harmful substances;4. The core layer is made of hard fibers, and the strength is higher than that of ordinary wood plastic;4. The formula reduces the shrinkage and expansion rate compared with ordinary wood plastic;5. The co-extrusion method is more conducive to environmental protection and the enhancement of profile performance

How to prevent the bottom of the hollow board from deforming

How to prevent the bottom of the hollow board from deforming Among the various packaging boxes materials, the PP hollow board box is considered to be a very popular type It makes everyone satisfied whether in appearance or function. Good hollow board packaging box, also known as PP plastic turnover box, is made of environmentally friendly raw materials PP polypropylene. It has no peculiar smell and has a long service life. It can bring customers good moisture-proof, flame-retardant, anti-static, and resistant Corrosion, wear resistance, compression resistance, anti-vibration, anti-ultraviolet, heat preservation, and sound insulation effects, so let us talk about how to prevent the bottom of the hollow board turnover box from deforming! In the actual application process, there are many specifications of the hollow board turnover box, which can be processed into different styles according to market demand and customer preferences. In the production process, the manufacturer can extend the service life of the box. To ensure the integrity of the internal goods, it will be more attentive to the bottom of the box. In order to prevent the bottom of the box from deforming and breaking, the hollow board box manufacturer will carry out a series of operations. First of all, hollow board box manufacturers will work hard on raw materials and functional preparations, and will choose high-quality raw materials to make packaging boxes. During the production process, a certain proportion of corrosion-resistant and anti-fracture agents will be added to make the box materials more flexible and extensible. It is not easy to deform and break even when exposed to strong external pressure. Secondly, hollow board box manufacturers will add different specifications of pads, brackets and cushions inside the box to better improve the service life of the box and effectively protect the internal goods.

how to install wpc pavilion / wpc summer house ?

how to install wpc pavilion / wpc summer house ? Pavilion is a kind of traditional architecture, It is used for people rest, enjoy the shade or view the scenery. the palilion is open structure, no walls. The top can be four corner pavilion, hexagonal pavilion, octagonal pavilion and other forms pavilions.  1. make sure ground is flat and confirm the column position 2. fix spare parts to the groud 3. install four column  4. install the lower beam 5. install upper beam 6. install oblique beam  7. install wpc outer beam 8. install wpc inner beam 9. install roof edge  10. finish wpc summer house

how to treat the surface of pvc wpc door ?

how to treat the surface of pvc wpc door ? the advantage of wood plastic wpc door  1. The raw material used for the wpc door does not contain formaldehyde. during production, There is no release of any toxic and harmful gas and odor, and it is a human-friendly product that meets the environmental protection standards of modern interior decoration.2. Waterproof, moisture-proof, anti-corrosion, anti-mould, anti-moth, non-deformation. wpc have characteristics of both wood and plasticwpc doors can be used as inside door and are especially suitable for place with large temperature differences, humidity, and poor ventilation. and also suitable for places that require anti-corrosion, mildew, and moth-proof storage rooms, such as damp toilets.3. Good heat preservation and sound insulation. The material used in the wpc door has uniform and dense cells and a specially designed hollow cavity structure, which can be feed foam to ensures heat and sound insulation.After testing, the wpc door has a heat transfer coefficient of 1W/m2.k, and its thermal insulation performance has reached GB/T16729-1997 level I; the sound insulation performance level is 6, with good thermal insulation and sound insulation performance what is the surface treat way for wpc door ? we can provide turnkey project from A to Z and we have sample machine in stock. we can take you to customer factory to visit the whole procedure. 1. laminating machine:  laminate pvc film / wrapping paper / vener / CPL / acrylic sheet / pet sheet / or colourful sheet to wpc doorthis machine use PUR reactive hot melt glue adhesive, solvent resistance,good weather resistance 2. painting machine Can spray PU, PE, UV, water-based paint; the system software adjusts the running speed of the spray gun according to different paints 3. CNC engraving machine The engraving machine control system can finish 3D processing. Able to perform fast and smooth three-dimensional processing, engraving or cutting

how to install wpc decking

how to install wpc decking 

What are the advantages of decking in outdoor park wetlands

What are the advantages of decking in outdoor park wetlands Plastic wood materials have many advantages such as non-perishable, non-deformable, moisture-proof, mothproof, and mildew-proof. They can be used in engineering construction, home decoration, gardens, outdoor parks, etc.At this stage, preventive measures for returning farmland to forests have not yet solved the shortage of woodr in the market. Environmentally-friendly decorative materials have become new materials for many country's development, manufacturing and manufacturing. Plastic wood decking is used widely, especially in the building materials and decoration industry. plastic wood products includes hundreds of categories, such as outdoor decking, railings, plank roads. As a city's ecological adjustment and leisure space, wetland has played a huge role in the environmental development and climate adjustment around the city, and wood plastic has assumed an important role in it. However, in the construction process of scenic spots, in order to have a more ideal ecological leisure effect, a large number of real wood products are often used as the floor of the landscape plank. This kind of ground wastes forest and destroys the environment. The application of wood plastic composite decking alleviates the contradiction between people's pursuit of natural leisure life and environmental protection. Therefore, more and more plastic wood composite decking products appear in park wetland scenic areas. 1. plastic wood decking not only has the texture of natural wood, but also has many advantages. 2. It is not easy to be deformed, moldy, and insect proof, and no complicated maintenance is required3. Plastic wood composite materials are produced through high temperature melting and high pressure extrusion molding, therefore, wpc products have a dense structure.4. The density of plastic wood decking is as high as 1.3g/cm, which is about three times than traditional wood.5.Plastic wood decking also has better anti-mildew, anti-corrosion, moisture-proof and insect-proof functions than anti-corrosion wood.6. Better anti-aging properties.7. Plastic wood is safe and moisture-proof, has strong oxidation resistance and is not easy to be corroded. The service life is very long8. the installation of plastic wood decking saves time and effort. It can be sawed with common props, and it can also be colored according to the different request, and the appearance of multi-dimensional changes can be maintained. Plastic wood decking has good bearing capacity and tensile strength, and has good maintenance and protection.

the feature of wpc door frame

the feature of wpc door frame  1. Health and environmental protection: The surface treatment is hot transfer,laminating or environmental painting, without harmful substances such as formaldehyde. 2. Sturdy and durable: wood plastic material, not easy to deform; mothproof, waterproof, sound insulation, heat preservation, good flame retardant effect. 3. Individual fashion: fashionable and individualized design, matching with decorative lines, window covers, etc., to meet the needs of Overall decoration 4. Strong wooden feeling: The wood flour content in this material can reach 30-50%, which is very close to the density of wood, and has a natural wooden feeling. 5. Corrosion resistance: wood flour is coated with polymer material, which makes this material have good acid-base inertness, so this material has good corrosion resistance. we are professional for the wpc door frame production line Wood Plastic WPC Door Frame Machine PVC WPC Door Profile Extrusion Line Machine

what is the advantage of wood plastic wpc door ?

what is the advantage of wood plastic wpc door ?  The wood-plastic door is made by mixing wood powder and pvc resin through a molding process. It has the excellent characteristics of both wood and plastic, and the products achieve the effect of real wood imitation. without any glue in the raw materials and the production process.  it will not produce harmful substances such as formaldehyde, benzene, ammonia, trichloroethylene, etc. It is a green and environmentally friendly new material that replaces traditional wood. 1. The wood-plastic door formula system with a certain proportion of materials, including stabilizers, foaming agents, modifiers, etc., and they are mixed strictly according to formula to ensure the product quality  2. Wood plastic doors are durable, have a long service life, have the appearance of wood, have higher hardness and rigidity than plastic products, have excellent physical properties, and have better stability than wood, and will not produce cracks / warping, no wood knots / twill, etc. . It can be sawed, planed, bonded, and can be fixed with nails or screws. 3. The wood plastic door has good flame-retardant performance. The wood plastic door will not support combustion in case of an open flame and will extinguish automatically after leaving the fire. After testing, wood plastic composite door fire performance grade is B1 which will greatly improve the safety of the home and residence. 4. Various surface treatment technologies, hot transfer, laminating or paintingcan produce various appearances according to customers' needs, and have high stability and long life. 5. The wood plastic door has a reasonable structure and high strength. The special wall cavity structure design ensures foam material can be feeded to get good heat insulation and sound insulation. with the excellent formula design and reasonable production technology, the strength of the product is guaranteed greatly 6. The wood plastic door has a quick-installation structure, saving time and effort for installation. 

how to get good printing effect on pp hollow board ?

how to get good printing effect on pp hollow board ? The hollow board turnover box is a more popular packaging box in modern society. Its overall workmanship is very fine, and the appearance quality is very good. It has good function on moisture-proof, flame-retardant, anti-static, corrosion-resistant, abrasion-resistant, UV-resistant, pressure-resistant and so onit can also be printed with different patterns and texts according to the needs of customers and the field of use. Let's talk about how to ensure the printing effect of hollow board turnover box . First of all, the hollow board turnover box is made by PP polypropylene hollow board. the hollow board itself is a material that is easy to print color. Many manufacturers will print the board into a variety of patterns and textuse according to its flatness and customer request. Printing into a variety of patterns and text, they usually choose two coloring methods, one is spraying and screen printing, these two methods are not easy to fade when printed on the boardUsually they will choose two methods, one is spraying and another is screen printinby these two methods, the patterns are not easy to fade  There are also some individual factors that will affect its printing effect, such as the quality of the board and printing technology.  the board shall be flat and smooth

Where is the anti-uv hollow board generally used

Where is the anti-uv hollow board generally used The hollow board is also called PP plastic hollow board, corrugated board or Lattice board. This is an environmentally friendly board with high appearance quality and powerful functions. The PP plastic hollow board is made of polypropylene and has strong Moisture-proof, flame-retardant, anti-static, anti-corrosion, anti-wear, anti-UV, anti-vibration, sound insulation, heat preservation effect Anti-UV is actually anti-ultraviolet. As the name implies, anti-UV has good anti-ultraviolet function. In the production of plastic hollow board, anti-UV masterbatch will be added. In our daily life, we can see anti-UV hollow board materials. For example, most of the advertising display boards are made of anti-UV PP hollow boards. This kind of display board has a smooth and neat appearance and has a good coloring effect. Different colors and texts can be printed to achieve the effect of advertising display. In addition, this kind of display board can adapt to the external environment and ensure its own integrity to play a better advertising display effect. In addition to be used as external advertising display boards, the anti-UV hollow board is also processed into turnover boxes with different specifications and functions, which brings convenience to logistics transportation and cargo storage.

Can PP Hollow Board Be Used As Packing of Auto Parts

Can PP Hollow Board Be Used As Packing of Auto Parts The hollow board box for auto parts packaging is made by pp hollow board material and processed according to customer needs. The overall appearance of the box is smooth, the color is rich, and it is outstanding in terms of moisture-proof, mildew-proof, flame-retardant and anti-static. The hollow board box also has good anti-vibration, anti-pressure, anti-ultraviolet, heat preservation, and sound insulation functions. When encountering a special external environment, it can effectively protect the quality and performance of the auto parts inside.

Why use knife card inside the pp turnover box ?

Why use knife card inside the pp turnover box ? There is a very cost-effective board in life. Its name is hollow board. It is made of environmentally friendly pp polypropylene, non-toxic, tasteless, and powerful. The hollow board has a smooth appearance and rich colors. The blue hollow board can be made into different specifications of knife card packaging. The knife card has strong function on moisture-proof, flame-retardant, anti-static, corrosion-resistant, wear-resistant, anti-vibration,uv resistancethe hollow board knife card packaging can effectively fix the inside goods position, avoiding the effect from external vibrations The frequency of use of the knife card in the hollow board turnover box in various fields is still very high. First, its color is relatively popular, suitable for various fields, and secondly, its powerful functions and high cost performance are the main reasons why everyone chooses it. It can not only protect inside goods, but also effectively guarantee its own integrity. It can be said to be very strong. Under normal circumstances, a skeleton box and knife card box can be used for about five years Which the paper box can not reach In the past, users were used to using cardboard knife cards because of its low price. However, cardboard has a fatal disadvantage. It has poor waterproof and moisture-proof functions. After two times, it can no longer be used. Therefore, compared with cardboard and hollow board products, hollow board products are still strong and durable.

Is the hollow board suitable for the seafood box of fishery industry?

Is the hollow board suitable for the seafood box of fishery industry? there are many people live on fisheries. In what way will fishery materials be transported to other places? Is it appropriate to use a hollow board seafood box? PP hollow board boxes, its popular very much in recent years. This kind of box is not very special in appearance. It is similar to ordinary plastic or paper boxes, but this box has three major advantage which other boxs do not have.First of all, the surface of the box body is flat, without obvious pits or pits, easy to paint, and can be sprayed with bright and rich colors according to the characteristics of the products inside Secondly, the hollow board box usd as seafood box has good moisture-proof, mildew-proof, flame-retardant, anti-static, anti-vibration, corrosion resistance, abrasion resistance, UV resistance, heat preservation and sound insulation functions during actual application. It can be used in the fishing industry. it will ensure the freshness of the seafood inside and avoid unnecessary losses in the transportation The third point, the PP hollow board box is not a disposable box, it can be recycled and reused, is an authentic environmentally friendly product.