Wood Plastic WPC Machiner
Corrugated Pipe Machine
Wood Plastic WPC Machiner
PP Hollow Corrugated Sheet Machine
Plastic Sheet Machine
Plastic Pipe Machine

Wood Plastic WPC Machiner

Cleaning and Maintenance of New Plastic Wood Decking Floor

Cleaning and Maintenance of New Plastic Wood Decking Floor wood-plastic composite decking is a kind of bamboo/ wood mix  with polymer material (HDPE plastic) and processing aids as material. mixed uniformly and then heated and extruded by mold equipment. This kind of high-tech green environmentally friendly materials have both the properties and characteristics of wood and plastics, and can replace wood and plastics. The English abbreviation of Wood Plastic Composites is WPC. Plastic wood material is a new type of environmentally friendly and energy-saving composite material, can replace wood. It can be used for garden landscape, interior and exterior wall decoration, flooring, barriers, flower ponds, pavilions, etc. Generally speaking, the cleaning and maintenance of indoor plastic wood floors have the following points of attention: 1. Use soap, hot water and a hard brush to remove dirt and residue. After the plastic wood floor is installed, clean up dirt and debris in this way.2. Use alcohol or acetone to gently wipe the mark printed on the side of the plastic wood floor3. Use conventional floor cleaners or cleaners containing bleach (sodium hypochlorite) and detergent.4. If the floor has grease stains, immediately use a household degreaser to remove it, and then rinse with hot water.5. Wash the area with chalk marks with hot soapy water and bleach. Colored chalk marks are stubborn and cannot be removed, so consider using white chalk or talcum powder on the floor.6. ​​Melt ice and calcium chloride or rock salt on the floor. Most household product maintenance stores have it. When the ice starts to melt, rinse it off.7. Use hot soapy water to remove ink stains, and then wash thoroughly.8. Use cleaning products containing oxalic acid or phosphoric acid to remove dirt and rust stains on the floor. This will lighten the stain and it is possible to remove it.9. Use a common rust cleaner to remove the pigmentation pollution caused by the weathering of the floor.10. According to the instructions on the bleach package, mix the bleach into hot water to clean wine stains and fruit stains. Wipe the stains gently and rinse with hot water

What is Co Extrusion PE WPC ? What Advantage of Co Extrusion ?

What is Co Extrusion PE WPC ? What Advantage of Co Extrusion ? Co-extrusion wpc is a new product in recent years. It is produced by the most advanced extrusion molding technology in the industry.Co-extruded wood plastic has one more protective layer than ordinary wood plastic, which is more wear-resistant, scratch-resistant, stain-resistant, non-cracking, and non-mildew. Features: 1. co-extruded wood-plastic profile protective layer has the characteristics of high imitation wood pattern. 2. with a rich and diverse appearance, the board is more durable, non-cracking, stain-resistant, weather-resistant, and pressure-resistant, and its performance is greatly improved compared with ordinary wood plastic;3. The protective layer and the core layer are thermally mixed and extruded, and the coating is tight and not separated; the co-extrusion process has no stickies, formaldehyde and other harmful substances;4. The core layer is made of hard fibers, and the strength is higher than that of ordinary wood plastic;4. The formula reduces the shrinkage and expansion rate compared with ordinary wood plastic;5. The co-extrusion method is more conducive to environmental protection and the enhancement of profile performance

how to install wpc pavilion / wpc summer house ?

how to install wpc pavilion / wpc summer house ? Pavilion is a kind of traditional architecture, It is used for people rest, enjoy the shade or view the scenery. the palilion is open structure, no walls. The top can be four corner pavilion, hexagonal pavilion, octagonal pavilion and other forms pavilions.  1. make sure ground is flat and confirm the column position 2. fix spare parts to the groud 3. install four column  4. install the lower beam 5. install upper beam 6. install oblique beam  7. install wpc outer beam 8. install wpc inner beam 9. install roof edge  10. finish wpc summer house

how to treat the surface of pvc wpc door ?

how to treat the surface of pvc wpc door ? the advantage of wood plastic wpc door  1. The raw material used for the wpc door does not contain formaldehyde. during production, There is no release of any toxic and harmful gas and odor, and it is a human-friendly product that meets the environmental protection standards of modern interior decoration.2. Waterproof, moisture-proof, anti-corrosion, anti-mould, anti-moth, non-deformation. wpc have characteristics of both wood and plasticwpc doors can be used as inside door and are especially suitable for place with large temperature differences, humidity, and poor ventilation. and also suitable for places that require anti-corrosion, mildew, and moth-proof storage rooms, such as damp toilets.3. Good heat preservation and sound insulation. The material used in the wpc door has uniform and dense cells and a specially designed hollow cavity structure, which can be feed foam to ensures heat and sound insulation.After testing, the wpc door has a heat transfer coefficient of 1W/m2.k, and its thermal insulation performance has reached GB/T16729-1997 level I; the sound insulation performance level is 6, with good thermal insulation and sound insulation performance what is the surface treat way for wpc door ? we can provide turnkey project from A to Z and we have sample machine in stock. we can take you to customer factory to visit the whole procedure. 1. laminating machine:  laminate pvc film / wrapping paper / vener / CPL / acrylic sheet / pet sheet / or colourful sheet to wpc doorthis machine use PUR reactive hot melt glue adhesive, solvent resistance,good weather resistance 2. painting machine Can spray PU, PE, UV, water-based paint; the system software adjusts the running speed of the spray gun according to different paints 3. CNC engraving machine The engraving machine control system can finish 3D processing. Able to perform fast and smooth three-dimensional processing, engraving or cutting

how to install wpc decking

how to install wpc decking 

What are the advantages of decking in outdoor park wetlands

What are the advantages of decking in outdoor park wetlands Plastic wood materials have many advantages such as non-perishable, non-deformable, moisture-proof, mothproof, and mildew-proof. They can be used in engineering construction, home decoration, gardens, outdoor parks, etc.At this stage, preventive measures for returning farmland to forests have not yet solved the shortage of woodr in the market. Environmentally-friendly decorative materials have become new materials for many country's development, manufacturing and manufacturing. Plastic wood decking is used widely, especially in the building materials and decoration industry. plastic wood products includes hundreds of categories, such as outdoor decking, railings, plank roads. As a city's ecological adjustment and leisure space, wetland has played a huge role in the environmental development and climate adjustment around the city, and wood plastic has assumed an important role in it. However, in the construction process of scenic spots, in order to have a more ideal ecological leisure effect, a large number of real wood products are often used as the floor of the landscape plank. This kind of ground wastes forest and destroys the environment. The application of wood plastic composite decking alleviates the contradiction between people's pursuit of natural leisure life and environmental protection. Therefore, more and more plastic wood composite decking products appear in park wetland scenic areas. 1. plastic wood decking not only has the texture of natural wood, but also has many advantages. 2. It is not easy to be deformed, moldy, and insect proof, and no complicated maintenance is required3. Plastic wood composite materials are produced through high temperature melting and high pressure extrusion molding, therefore, wpc products have a dense structure.4. The density of plastic wood decking is as high as 1.3g/cm, which is about three times than traditional wood.5.Plastic wood decking also has better anti-mildew, anti-corrosion, moisture-proof and insect-proof functions than anti-corrosion wood.6. Better anti-aging properties.7. Plastic wood is safe and moisture-proof, has strong oxidation resistance and is not easy to be corroded. The service life is very long8. the installation of plastic wood decking saves time and effort. It can be sawed with common props, and it can also be colored according to the different request, and the appearance of multi-dimensional changes can be maintained. Plastic wood decking has good bearing capacity and tensile strength, and has good maintenance and protection.

the feature of wpc door frame

the feature of wpc door frame  1. Health and environmental protection: The surface treatment is hot transfer,laminating or environmental painting, without harmful substances such as formaldehyde. 2. Sturdy and durable: wood plastic material, not easy to deform; mothproof, waterproof, sound insulation, heat preservation, good flame retardant effect. 3. Individual fashion: fashionable and individualized design, matching with decorative lines, window covers, etc., to meet the needs of Overall decoration 4. Strong wooden feeling: The wood flour content in this material can reach 30-50%, which is very close to the density of wood, and has a natural wooden feeling. 5. Corrosion resistance: wood flour is coated with polymer material, which makes this material have good acid-base inertness, so this material has good corrosion resistance. we are professional for the wpc door frame production line Wood Plastic WPC Door Frame Machine PVC WPC Door Profile Extrusion Line Machine

what is the advantage of wood plastic wpc door ?

what is the advantage of wood plastic wpc door ?  The wood-plastic door is made by mixing wood powder and pvc resin through a molding process. It has the excellent characteristics of both wood and plastic, and the products achieve the effect of real wood imitation. without any glue in the raw materials and the production process.  it will not produce harmful substances such as formaldehyde, benzene, ammonia, trichloroethylene, etc. It is a green and environmentally friendly new material that replaces traditional wood. 1. The wood-plastic door formula system with a certain proportion of materials, including stabilizers, foaming agents, modifiers, etc., and they are mixed strictly according to formula to ensure the product quality  2. Wood plastic doors are durable, have a long service life, have the appearance of wood, have higher hardness and rigidity than plastic products, have excellent physical properties, and have better stability than wood, and will not produce cracks / warping, no wood knots / twill, etc. . It can be sawed, planed, bonded, and can be fixed with nails or screws. 3. The wood plastic door has good flame-retardant performance. The wood plastic door will not support combustion in case of an open flame and will extinguish automatically after leaving the fire. After testing, wood plastic composite door fire performance grade is B1 which will greatly improve the safety of the home and residence. 4. Various surface treatment technologies, hot transfer, laminating or paintingcan produce various appearances according to customers' needs, and have high stability and long life. 5. The wood plastic door has a reasonable structure and high strength. The special wall cavity structure design ensures foam material can be feeded to get good heat insulation and sound insulation. with the excellent formula design and reasonable production technology, the strength of the product is guaranteed greatly 6. The wood plastic door has a quick-installation structure, saving time and effort for installation. 

What is WPC Application

What is WPC Application Pavilion, gallery, interior doors, skirting lines, overall cabinets, wardrobes, exterior wall hanging panels, ceilings, decorative wall panels, outdoor floors, guardrail posts, plastic steel pavilions, garden guardrails, balcony guardrails, garden fences, leisure benches, trees Pools, flower stands, flower box air conditioners, air conditioner shields, blinds, road signs, transportation pallets, etc.The application of wood plastic materials is flexible and can be used in any field of wood processing. It is the best environmentally friendly material to replace wood; wood plastic products play a vital role in the country’s low energy consumption and are a recyclable product. It is widely used in several major projects. 

What is WPC Advantage ?

What is WPC Advantage ?  (1) Waterproof and moisture-proof. It fundamentally solves the problem that wood products are easy to rot and swell and deform after absorbing water in humid and watery environments, and can be used in environments where traditional wood products cannot be used. (2) Anti-insect and anti-termite, effectively prevent pest harassment and prolong service life. (3) It is colorful, with many colors to choose from. It not only has natural wood feel and wood texture, but also can customize the color you need according to your own personality (4) It has strong plasticity, can realize individualized modeling very simply, and fully reflects individual style. (5) High environmental protection, no pollution, no pollution, and recyclable. The product does not contain benzene, and the formaldehyde content is 0.2, which is lower than the EO standard. It is the European environmental protection standard. It can be recycled and greatly saves the amount of wood used. It is suitable for the national policy of sustainable development and benefits the society. (6) High fire resistance. It can be effectively flame-retardant, with a fire-proof rating of B1, self-extinguishing in case of fire and does not produce any toxic gas. (7) Good workability, can be ordered, planed, sawed, drilled, and the surface can be painted. (8) The installation is simple, the construction is convenient, no complicated construction technology is needed, and the installation time and cost are saved. (9) No cracks, no swelling, no deformation, no maintenance and maintenance, easy to clean, save later repair and maintenance costs. (10) Good sound-absorbing effect and good energy-saving performance, making indoor energy saving up to 30% or more. 

What is WPC Performance

What is WPC Performance 1. The product has the same processing performance as the log. It can be nailed, drilled, cut, bonded, and fixed by nails or bolts. The surface is smooth and delicate without sanding and paint. The paint has good adhesion and can be customized according to individual Like painting. 2. The product has better physical properties than logs, and has better dimensional stability than wood. Noisy will cause cracks, warping, no wood knots, or twill. Adding colorant, film or composite surface can be made into colorful Various products, so there is no need for regular maintenance. 3. It can meet the needs of various specifications, sizes, shapes, thicknesses, etc. This also includes providing finished products with a variety of designs, colors and wood grains, giving customers more choices. 4. The product has excellent properties such as fireproof, waterproof, corrosion, moisture resistance, no moth, no fungus growth, acid and alkali resistance, no toxicity, no pollution, etc., and low maintenance costs. 5. The product has a wood-like appearance, higher hardness than plastic, longer life, thermoformable, high strength, and energy saving. 6. The product is of strong quality, light weight, heat preservation, smooth surface, no formaldehyde and other harmful substances, non-toxic, non-polluting.

What is WPC ? Wood Plastic Composite

What is WPC ? Wood Plastic Composite WPC (Wood-Plastic Composite) is a new type of composite material that has flourished in recent years at home and abroad. the material is recycled hdpe/pp or pvc mix with wood flour, rice husk, straw and other waste plant fibers after mixing,the material will go through melting,mold, forming,cooling, haul off, cutting, stacking, surface treatment to get final product.Mainly used in building materials, furniture, logistics packaging and other industries.