hollow solid wpc door jamb making extrusion machine production line supplier
- Model
- SJ65/132
Item specifics
- Machine Type
- wpc door jamb machine
- Material
- PVC with wood and chemical
- Product Width
- Customerized
- Extruder Size
- SJ51/105 65/132 80/156
- Production Speed
- 0.5-5m/Min
- Product
- Ceiling,Wall,Skirting,Window,Door Frame
Product review
Description
hollow solid wpc door jamb making extrusion machine production line supplier
Solid WPC door jamb making machine uses PVC and wood powder as raw material, mixing with CaCo3 and chemical additives, for making WPC door frame with solid profile mold.
the solid WPC door jamb mainly size: 75*45mm, 100*50mm, 100*62mm, 125*62mm, 150*62mm, 175*62mm.
the special designed extruder and mold is adopting solid profile with foaming technology
the product density can be 0.8-1.3 gram/cm3 and adjustable by adjusting the foaming agent and foaming regulator.
hollow solid wpc door jamb making extrusion machine production line supplier
|
item
|
machine discription
|
marks
|
|
SJSZ65/132 pvc wpc door frame extrusion line
|
auto material loader
|
load material to extruder automatically
|
|
SJSZ65/132 connical double screw extruder
|
mixing and melting material
|
|
mold: die + calibrating mold + water tank | change mold can get different shape and size | |
vacuum calibrating table 6m/8m/10m/12m | for product forming and cooling | |
haul off machine | double caterpillar | |
cutting machine | fixed length cutting | |
dust collector | collect dust after cutting | |
stacking machine | product stacking | |
auxilary machine | 300/600 mixer | mix all material together |
water chiller | provide chilling water | |
air compressor | provide compressed air | |
wastage recycle machine | 360 crusher | recycle wastage on production to reuse |
500 miller | ||
surface treatment machine | laminating machine | get wooden grain |
ASA co extrusion |
machine details
a. connical double screw extruder with auto loader
machine model: SJSZ51/105, 65/132, 80/156, 92/188
motor: SIEMENS
inverter: ABB
temperature controller: SIEMENS
motor: SIEMENS
inverter: ABB
temperature controller: SIEMENS
b. die unit and mold
material: 3Cr17, tempering HRC28-32, ensure anti-rust, hardness and service life
Calibrator size: 240mm or 320mm
Quantity of calibrator section:1 or 2 or 3 or 4 sets according to product size shape
Water tank length: 2000mm or 4000mm, fiber glass board, accessories are made of stainless steel
Calibrator size: 240mm or 320mm
Quantity of calibrator section:1 or 2 or 3 or 4 sets according to product size shape
Water tank length: 2000mm or 4000mm, fiber glass board, accessories are made of stainless steel
c. vacuum calibrating table
length: 6m,8m,10m,12m
material of surface: 304 stainless steel
vacuum pump included
water pump included
material of surface: 304 stainless steel
vacuum pump included
water pump included
d. haul off and cutting machine
haul off with double gear box
haul off controlled by ABB inverter
saw blade cutting
dust collector included
haul off controlled by ABB inverter
saw blade cutting
dust collector included
e. protective film coating machine
coat protective film to product surface
can coat 1-2-3-4-5 surface
f. stacking machine
4m/6m/8m length
stainless steel material
f. colourful film laminating machine
g. ASA co extrusion to get wooden grain
by change mold, same machine can produce the following products:
