600mm PVC Edge Banding Sheet Extrusion Machine Line For Making Furniture Edge Banding
- Model
- SJ65/132
Item specifics
- product width
- 600mm
- material
- pvc with caco3
- screw
- 65/132 connical double screw extruder
- forming type
- three roller calender
- cooling
- air
Product review
Description
600mm PVC Edge Banding Sheet Extrusion Machine Line For Making Furniture Edge Banding
Plastic pvc sheet edge banding extrusion line/ plastic sheet production machine
1,Plastic sheet extrusion line is capable of continuously producing mono-layer or multi-layer PVC/PP/PE/ABS/PMMA/PC/PS/HIPS plate and sheet with the width less than 3000mm and thickness of 0.25-30mm . The products are widely used in the fields of refrigerater ,air conditioner ,auto,advertisement ,and construction ,environment protection ,furniture,etc.
2, Plastic sheet extrusion line includes many equipments ,such as :extruder ,screen changer and mould,three-roller calendaring machine,bracket of cooling roller,landscape orientation cutting machine and the winder.

equipment list of 600mm PVC Edge Banding Sheet Extrusion Machine Line For Making Furniture Edge Banding
Machine list
|
Quantity
|
material loading device
|
one set
|
SJSZ65/132 connical double screw extruder
|
one set
|
die unit | one set |
Three-roller calendaring machine | one set |
Cooling bracket | one set |
Hauling off device | one set |
Cutting device | one set |
Stainless steel stacker | one set |
Electricity control system | one set |

600mm PVC Edge Banding Sheet Extrusion Machine Line For Making Furniture Edge Banding

SJSZ65/132 connical double screw extruder
screw material feeding device
Siemens motor
ABB inverter

SJSZ65/132 connical double screw extruder
OMRON temperature controller
Siemens low voltage appliance

mold
Reasonable structure of mould should be chosen in terms of material, whereas moulds of clothes-rack mode are widely accepted to regulate flow-distribution and guarantee even thickness of plates (sheets).

mold
mold material: hot work steel, 5CrNiMo,mold chamber and mirror surface under polish treatment

Three roller calendaring machine for Plastic sheet extrusion machine
Inclined and vertical three-roller calendaring machine should be chosen according to the thickness of the plates(sheets).
roller surface is under intermediate frequency quenching treatment, hardness HRC>55 degree

Three roller calendaring machine for Plastic sheet extrusion machine
under hard chrome plating treatment, harness is HRC62 degree, surface roughness is Ra0.25Um
four road wheels that can adjust the height separately and is easy to adjust the hrizontal position
three helica gear hard surface reduction box tht can drive separately or linkage. three roler machine can be synchronization regulated with tractor

Temperature controller
heating and cooling medium: oil
temperature control range: 30-150

Temperature controller
three roller temperature controls can be adjusted separately

edge cutting devicve
the edge-shearing device equipped can guarantee fixed width of plates (sheets) and quality of edge.
Cutting by: high quality alloy knives.
Quantity of Knives: two sets
Quantity of Knives: two sets

Cooling bracket
length 5000mm
roller material: 304 stainless steel under polish treatment

midddle cutting device
middle cutting used to cut wide sheet into narrow sheet

edge wastage coiling device
it will be crushed and milled, then mix with new material for reuse

haul off machine
Double roller haul off machine
Roller material: rubber
Roller material: rubber

haul off machine
roller up and down: by cylinder control
Speed control: Frequency
Speed control: Frequency

Cutting machine
It is of length-fixed cutting with cutting precision less than 2mm

Cutting machine
and adopts alloy blade or rigid alloy saw bit to ensure the good cutting effect and constantly stable performance.

coiling device
double working position
equip meter counting and alarming device

coiling device
pad shaft expansion