pvc sheet making extruder machine line / pvc sheet production machine
pvc sheet making extruder machine line / pvc sheet production machine
pvc sheet making extruder machine line / pvc sheet production machine
pvc sheet making extruder machine line / pvc sheet production machine
pvc sheet making extruder machine line / pvc sheet production machine
pvc sheet making extruder machine line / pvc sheet production machine
Model
SJ65/132

Item specifics

product width
600mm
material
pvc with caco3
screw
65/132 connical double screw extruder
forming type
three roller calender
cooling
air

Product review

Description

pvc sheet making extruder machine line / pvc sheet production machine

Plastic pvc sheet edge banding extrusion line/ plastic sheet production machine

1,Plastic sheet extrusion line is capable of continuously producing mono-layer or multi-layer PVC/PP/PE/ABS/PMMA/PC/PS/HIPS plate and sheet with the width less than 3000mm and thickness of 0.25-30mm . The products are widely used in the fields of refrigerater ,air conditioner ,auto,advertisement ,and construction ,environment protection ,furniture,etc.

2, Plastic sheet extrusion line includes many equipments ,such as :extruder ,screen changer and mould,three-roller calendaring machine,bracket of cooling roller,landscape orientation cutting machine and the winder.

pvc sheet making extruder machine line / pvc sheet production machine
Machine list
Quantity
material loading device
one set 
SJSZ65/132 connical double screw extruder
one set 
die unit 
one set 
Three-roller calendaring machine
one set 
Cooling bracket
one set 
Hauling off device
one set 
Cutting device
one set 
Stainless steel stacker
one set 
Electricity control system
one set 
pvc sheet making extruder machine line / pvc sheet production machine
SJSZ65/132 connical double screw extruder
screw material feeding device
Siemens motor
ABB inverter
SJSZ65/132 connical double screw extruder
OMRON temperature controller
Siemens low voltage appliance
mold 
Reasonable structure of mould should be chosen in terms of material, whereas moulds of clothes-rack mode are widely accepted to regulate flow-distribution and guarantee even thickness of plates (sheets).

mold 
mold material: hot work steel, 5CrNiMo,mold chamber and mirror surface under polish treatment
Three roller calendaring machine for Plastic sheet extrusion machine
Inclined and vertical three-roller calendaring machine should be chosen according to the thickness of the plates(sheets).
roller surface is under intermediate frequency quenching treatment, hardness HRC>55 degree

Three roller calendaring machine for Plastic sheet extrusion machine
under hard chrome plating treatment, harness is HRC62 degree, surface roughness is Ra0.25Um
four road wheels that can adjust the height separately and is easy to adjust the hrizontal position
three helica gear hard surface reduction box tht can drive separately or linkage. three roler machine can be synchronization regulated with tractor
Temperature controller
heating and cooling medium: oil
temperature control range: 30-150

Temperature controller
three roller temperature controls can be adjusted separately
edge cutting devicve
the edge-shearing device equipped can guarantee fixed width of plates (sheets) and quality of edge.
Cutting by: high quality alloy knives.
Quantity of Knives: two sets
Cooling bracket
length 5000mm
roller material: 304 stainless steel under polish treatment
midddle cutting device
middle cutting used to cut wide sheet into narrow sheet
edge wastage coiling device
it will be crushed and milled, then mix with new material for reuse
haul off machine
Double roller haul off machine
Roller material: rubber
haul off machine
roller up and down: by cylinder control
Speed control: Frequency
Cutting machine
It is of length-fixed cutting with cutting precision less than 2mm
Cutting machine
and adopts alloy blade or rigid alloy saw bit to ensure the good cutting effect and constantly stable performance.
coiling device
double working position
equip meter counting and alarming device

coiling device
pad shaft expansion